BUDGET PATTERNMAKING

HERE IS A WATER PIPE FROM A VINTAGE RACE CAR SHOWING THE DISSECTION CUT

THE WATER PIPE NOW IN 2 PIECES THE ROT AND BROKEN BITS ARE FILLED WITH FILLER, SANDED SMOOTH, THEN ANY MACHINING ALLOWANCE IS ADDED

A BATCH OF THE INLET MANIFOLDS READY TO BE SHIPPED OUT

A SLIGHTLY TRICKIER WATER PIPE DISSECTED INTO THREE PARTS.

SEE THE WOOD FOR THE MACHINING ALLOWANCE

THE SAME PIPE FROM THE BACK. YOU CAN SEE WHY WE NEEDED THE SECOND CUT

THIS IS A WATERPUMP FRONT COVER WITH AN OUTLET ELBOW. IT WAS TO TRICKY TO DISSECT

THIS IS THE REVERSE SIDE SHOWING THE SNAIL SHAPE.

THE ROUND BOSS IN THE MIDDLE AND ON THE PIPE BOTTOM RIGHT ARE CORE SUPPORT PRINTS

THIS IS THE COREBOX THE TWO HALVES FIT TOGETHER AND WHEN FILLED WITH HARD SAND MAKE A CYLINDRICAL CORE THAT SITS IN THE SUPPORT PRINTS

THIS IS AN ORIGINAL CLASSIC MOTORCYCLE IGNITION CASE.

THE YELLOW PATCHES ARE FILLER USED

TO RESTORE THE ORIGINAL SHAPE

THIS IS THE CASTING COPIED FROM THE ORIGINAL MASTER PATTERN ON THE LEFT

Contact

Tel. 01453 755344

Email:whitewaycraft@aol.com